Ted Pella

PELCO® Water Based Graphite Paint

PELCO® Isopropanol Based Graphite Paint

Conductive graphite paint, primarily designed for SEM sample preparation. The graphite flakes, with an average size of 1µm, are bonded by a cellulose resin with isopropanol as diluent. Good bonding properties on most materials. Graphite content is 20%. Ideal to mount samples on sample stubs or to make a conductive path to the sample surface. Let fully dry before using in the SEM. Maximum service temperature: 200° C.
F, I - 16053, 16053-SPC MSDS 16054 MSDS
Technical Notes, PELCO® Conductive Graphite Isopropanol Based (116KB pdf)
Conductive Adhesives Comparison Table

DAG-T-502 Carbon Paint

one component, ready to use

PELCO® Conductive Liquid Silver Paint

a reliable conductive ground path for SEM specimens
Air drying silver paint to make effective ground. Curable at room temperature and has high adhesion to any material. Surfaces do not have to be prepared prior to application and will adhere to such materials as polymer (phenolic) boards, ceramic, glass, metal, plastic and fiberglass. It should be mixed well with a spatula before using. RoHS compliant.
The container is offered in two sizes (15g and 30g) and is provided with an applicator brush. Silver flake grain size is an average of 80%, <1.0µm. Sheet resistance is 0.02 ohms per square @ 1 mil (0.001” = 0.025mm) thickness and is a function of the coating. Service temperature range is -40°C to 260°C
PELCO® Technical Notes, PELCO® Colloidal Silver, Product Numbers. 16031, 16034(417KB PDF)
Conductive Adhesives Comparison Table
16031, 16034 MSDS - 16021 MSDS
F, I