Description
Low Profile Large Diameter 3-Port Thermowell Assembly for Vertical Sidearm Vessels. Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube.
Specifications:
- Port Thermowell Assembly
- For Low Profile 3L Vessel
- Material: 316L Stainless Steel With Ra 32 Or Better – Inside & Out
- One Vent Port; .250″OD X .152″ ID X 1.0″Above & Below Cap Slug
- One Addition Port: .250″OD X .152″Id X 8.35″ Insertion Length
- One Thermowell Port: .375″OD X .305″ID X 8.35″ Insertion Length
- All Tubes Seam Weld In To Cap Slug – Bottom Side Only
- Supply With 45mm Pp Blue Open Top Screw Cap & White Silicone Gasket