Physitemps original Thermes high accuracy ISA based data acquisition system has been redesigned to create a more versatile USB model. The new system requires no internal connections to your computer and simply connects via an external USB port on your laptop or desktop computer. Two versions of the data acquisition system are available. The standard version, THERMES USB, is connected to your computer USB port. The wireless version - THERMES USB WFI, can be either directly connected to a USB port or, with the included wireless receiver, positioned up to 100 feet from the host computer.Each unit will accommodate up to 7 type T thermocouple sensors and multiple Thermes units may be connected to the same computer for more thermocouple inputs. A high accuracy electronic cold junction compensation circuit maintains typical system accuracy of ±0.2°C over an ambient temperature range of 15 to 35°C. Individual offsets may be added to each input in software to facilitate individual calibration of each channel. The THERMES USB WFI is a Type T Thermocouple data acquisition system with asecure 2.4GHz wireless link to its host computer. Specifications for the device are thesame as the THERMES USB except for its wireless capability. The THERMES USBWFI includes a wireless receiver that is connected to the host computer via a USBport. All communications between the host computer and THERMES pass throughthis device. The THERMES USB WFI may be connected directly to the host computervia a standard USB port (from which it also draws its power) or operated remotelyfrom the BP-1 battery pack. A wall mounting USB power supply is also providedwith THERMES USB WFI.
OPT-1 Optical Link A 10 meter optical cable is available with built in transmitter and receiver to allow the THERMES USB to be operated infull optical isolation from the host computer. A medical grade isolated power supply is provided to power the opticaltransmitter and THERMES data acquisition system when used with this cable. Alternatively, a rechargeable Lithium Ionbattery pack, the BP-1, is available to maintain the THERMES-USB or THERMES- USB WFI totally isolated from theAC supply.
BP-1 Li-Ion Battery Pack The model BP-1 Li-Ion battery pack is designed for use with the THERMES USB and THERMES USB WFI Type T temperature data acquisition systems. It allows the data acquisition system to be operated for up to 100 hours continuously without any additional power source. The BP-1 provides either 16V, 19V or 5V DC output to run either the THERMES or a laptop for an extended period of time. The power supply has a capacity of 130 watt hours allowing the THERMES to operate for up to 100 hours continuously. Operating time with a laptop will vary from 3-4 hours in addition to the laptops fully charged normal running time. The BP-1 may also be used with the OPT-1, opto-isolator cable with the adaptor cable provided. A charge level indicator comprising four LEDs indicate remaining battery life.
Operating SoftwareFor customers who already have Labview or Dasylab no additional software is necessary. Recommended operating software is Dasylab Lite version 9.01. The Lite version provides all the necessary functions to display and store temperature data in digital and graphical formats in real time. Users may customize the display to suit their particular application. The Dasylab Basic version provides additional features for data manipulation and statistical analysis. Braintree的鼠标幻影-为Micro-CT扫描仪提供参考标准Micro-CT系统可提供精确，准确和高分辨率的测量结果。这些系统的视野要求适当缩放的QA体模。CIRS 090型MicroMouseTM和091型注水鼠标幻影提供了量化X射线衰减和吸收特性方面的钙和骨密度的工具。羟基磷灰石（HA）是哺乳动物牙齿和骨骼的主要成分，是评估矿物质密度的最合适参考。CIRS将HA与软组织等效的聚合物背景混合在一起，以提供参考值，其HA负荷范围为0 mg / cc至750 mg / cc。羟基磷灰石的晶粒尺寸和棒的均质性已优化，可用于Micro-CT。固态MicroMouse幻影和注水鼠标幻影均包含11种不同矿物含量和尺寸的棒。它们可以像评估全身扫描仪一样用于评估Micro-CT扫描仪。该目标适用于确定对比度的可检测性和估计低对比度的分辨率。在MicroMouse Phantom中，杆嵌入在软组织等效的环氧材料中，该材料的大小和形状均与小型啮齿动物相同。充满水的鼠标幻影在防水的聚碳酸酯外壳中包含11个杆，非常耐用并且耐多种化学物质。091型外壳可轻松填充各种液体，以改变杆和周围液体之间的对比度。090和091型中使用的11根Micro-CT棒也可以作为092型单独购买，以及其他长度，直径和HA装载选项。发送电子邮件以获取更多详细信息。特征：25 mg / cc-750 mg / cc HA目标肺，肌肉和脂肪适用于Micro-CT固体或液体填充
