Units | 0.1 mg |
Host |
Background As a fluorescent marker for biotine conjugates. It is of critical importance always to establish by titration the optimum working dilution, since it depends on the variables of the test arrangement.Working dilutions are usually from 2 to 5 μg/ml.
ProductLyophilized, stable violet powder. 0.05% Sodium azide.
Product Form: Texas Red
Formulation: Lyophilized, stable violet powder. 0.05% Sodium azide.
SpecificityTexas Red®-conjugated streptavidin.
ApplicationsELISA,Immunocytochemistry,Immunohistochemistry (frozen),(In)direct immunofluorescence. The conjugate is shipped at ambient temperature and must be stored at 4°C. Reconstitute the lyophilized product by adding 0.1 ml sterile water. Spin down to remove insoluble particles, divide into small aliquots, and store as a liquid at or below -20°C by adding an equal volume of glycerol. Repeated thawing and freezing should be avoided. If a slight precipitation occurs upon storage, this should be removed by centrifugation. It will not affect the performance of the conjugate. Dilutions should be stored at +4°C, not refrozen, and preferably used the same day. Avoid exposure to light.
Storage
CautionThis product is intended FOR RESEARCH USE ONLY, and FOR TESTS IN VITRO, not for use in diagnostic or therapeutic procedures involving humans or animals. It may contain hazardous ingredients. Please refer to the Safety Data Sheets (SDS) for additional information and proper handling procedures. Dispose product remainders according to local regulations.This datasheet is as accurate as reasonably achievable, but Exalpha Biologicals accepts no liability for any inaccuracies or omissions in this information.
Safety Datasheet(s) for this product:EA_Sodium Azide/wp-content/uploads/SDS/Antibody SDS with Sodium AzideV2.pdf